1998-2003 Honda/Acura Engine Torque Damper Installation Instructions

Installation Instructions for 93055

Ingalls Engineering Stiffy ™ Engine Torque Damper for:

2001-2003 Acura CL, 1999-2003 Acura TL and 1998-2002 Honda Accord 3.0L V6

Step 1: Remove the 2 bolts from the passenger side engine mount. Marked “A” in image #1.

Step 2: Install the Engine Bracket over the engine mount holes with the narrow bolt flange to the rear and the wider bolt flange to the front.

Step 3: Tighten bracket to the engine mount using the two longer, flanged head bolts in the hardware pack. See image #2 at left.

Step 4: Remove the 4 nuts from the passenger side upper strut mount. Marked “B” in image #1.

Step 5: Install the Strut Bracket over the strut studs with the ETD mounting tab facing up and the notch in the bracket going around the A/C service port. You may need to loosen the factory strut brace at the firewall connection to get the bracket over the studs.

Step 6: Install the strut bracket using the 4 silver flanged nuts in the hardware kit and tighten. Download File PDF

Close Menu