1989 Chevrolet Corvette Steering Column Service and Repair

1989 Chevrolet Corvette V8-350 5.7L 

Steering Column: Service and Repair 

Disassembly/Assembly

SHAFT LOCK, TURN SIGNAL CANCELLING CAM, UPPER BEARING SPRING, UPPER BEARING SEAT & INNER RACE

Disassembly

1. Remove steering wheel as follows:

a. Disconnect battery ground cable, then remove horn cap from steering wheel by pulling.

b. Disconnect horn button wire, then remove telescope lever screws and shaft lock knob screw.

c. Remove telescope adjustment lever, steering wheel nut retainer and nut.

d. Remove steering wheel with a puller.

2. Remove spacer, bumper, spacer and snap ring retainer (Nos. 2, 3, 4, and 5 in Fig. 59).

3. Remove shaft lock retainer using lock plate compressor to depress shaft lock.

4. Remove shaft lock and carrier assembly, upper bearing spring, upper bearing seat and inner race.

5. Reverse procedure to install.

TURN SIGNAL SWITCH

Disassembly

1. Remove SHAFT LOCK, TURN SIGNAL CANCELLING CAM, UPPER BEARING SPRING, UPPER BEARING SEAT & INNER RACE as previously outlined. Download File PDF


Close Menu