2000 Volvo S40 Hazard Warning Switch Service and Repair

2000 Volvo S40 L4-1.9L Turbo VIN 25 B4204T2

Hazard Warning Switch: Service and Repair

Replacing warning lamp switch

- Remove the knobs from the heater control; insert a small screwdriver at the rear edge under each knob.

- Remove the heater control panel (insert two fingers into the opening and carefully pull out the control panel).

- Remove the two upper mounting screws (torx) for the heater control panel.

Carefully pry out the ventilation vents with a small screwdriver.

- Press the catches on the panel downwards from the inside using a screwdriver. Pull the panel forward slightly.

- Press in the two retaining clips on the switch. Pull the switch out backwards.

- Disconnect the connector.

Reinstall the components in reverse order. Download File PDF

Close Menu