2001 - 2003 QX4; Driver's Seat (With Adp Only) Won't Move Forward or Backward

2001 – 2003 QX4; DRIVER'S SEAT (WITH ADP ONLY) WON'T MOVE FORWARD OR BACKWARD

APPLIED VEHICLES: 2001 - 2003 QX4 (JR50) equipped with ADP only

IF YOU CONFIRM:

The driver's seat will not move in the forward or backward direction,

ACTIONS:

1. Confirm this bulletin applies (see steps 1 and 2 of the Service Procedure).

2. If needed, install the Seat Slide Motor Kit (see Parts Information).

SERVICE PROCEDURE

1. Using the power seat switch, tilt the front edge of the seat bottom all the way up.

2. Check voltage to the seat slide motor as follow:

• Measure voltage between terminal 1 ("BR" wire) and terminal 2 ("W/B" wire) in the seat slide motor connector (B518).

• See Figure 2. For more detailed information, refer to "Automatic Drive Positioner" in the EL section of the appropriate Service Manual (ESM).

WARNING: When checking the power seat slide motor circuit, do not confuse its black connector (B518) with the side air bag module yellow connector.

• This voltage check can be done with the seat slide motor connected. Download File PDF


Close Menu