2002 Chevrolet Monte Carlo SS Intake Manifold Replacement - Upper

2002 Chevrolet Monte Carlo SS


Removal Procedure

1. Disconnect the negative battery cable.

2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield - Replacement .

3. Remove the air cleaner intake duct.

4. Drain the cooling system.

5. Remove the right spark plug wires from the ignition control module and reposition.

6. Relieve the fuel pressure. Refer to FUEL SYSTEM PRESSURE RELEASE .

7. Remove the fuel rail assembly. Refer to FUEL RAIL & INJECTORS .

8. Remove the brake booster hose from the vacuum source manifold in the upper intake manifold.

9. Remove the exhaust gas recirculation valve (EGR) wiring harness heat shield nut, bolt and the EGR heat shield.

10. Remove the throttle body support bracket upper bolt.

11. Disconnect the electrical connectors from the following: ...

Installation Procedure

1. If the manifold was replaced install the following: ... Download File PDF

Close Menu