2005 Mazda 3 L4-2.3L Fuel Pump Testing and Inspection

2005 Mazda 3 L4-2.3L

Fuel Pressure Test

FUEL LINE PRESSURE INSPECTION

WARNING:

- Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite and cause serious injury or death and damage. To prevent this, complete the following inspection with the engine stopped.

1. Follow "BEFORE SERVICE PRECAUTION" before performing any work operations to prevent fuel from spilling from the fuel system. (See BEFORE SERVICE PRECAUTION.)

2. Disconnect the negative battery cable.

3. Disconnect the quick release connector (in the engine compartment). (See QUICK RELEASE CONNECTOR (FUEL SYSTEM) REMOVAL/INSTALLATION.)

4. Turn the lever of the SST parallel to the hose as shown in the figure.

5. Insert the SST quick release connector into the fuel pipe until a click is heard.

6. Verify that the quick release connector is firmly connected by pulling it by hand.

7. Start the fuel pump using the following procedure:

Using WDS or equivalent Download File PDF


Close Menu