2006 Honda Civic Door Panel Removal & Installation

2004 Honda Civic

DOOR PANEL REMOVAL/INSTALLATION

Special Tools Required

- KTC trim tool set SOJATP2014

- Trim pad remover, Snap-on A177A, or equivalent, commercially available.

2-DOOR

NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. If applicable, remove the regulator handle (A) by pulling the clip (B) out with a wire hook (C).

Fig. 7: Removing Regulator Handle

2. Remove the inner handle (A). Take care not to scratch the door panel.

1 Pry out on the upper portion of the cover (B) to release the hooks (C, D), then remove the cover.

2 Remove the screws.

3 Pull the inner handle forward and out half-way to release the hook (E).

4 Disconnect the inner handle rod (F) and power door lock switch connector (G) (driver's side for some models).

3. Remove the switch panel (A) (power window model) or the pull pocket (B) (manual window model). ... Download File PDF


Close Menu