2007 Pontiac Grand Prix Secondary Air Injection Pump Replacement

2007 Pontiac Grand Prix V6-3.8L - Service and Repair

Secondary Air Injection Pump Replacement

Removal Procedure

1. Remove the air cleaner assembly.

2. Disconnect the engine wiring harness electrical connector from the secondary air injection (AIR) pump electrical connector.

3. Squeeze the tangs together on the AIR pump inlet hose clamp at the pump until they lock, and reposition the clamp.

4. Remove the AIR pump inlet hose from the AIR pump.

5. Squeeze the tangs together on the AIR pump outlet hose clamp (3) at the pump until they lock, and reposition the clamp.

6. Raise and suitably support the vehicle. Refer to Vehicle Lifting.

7. Squeeze the AIR pump electrical connector clip (1) and push up in order to remove the clip from the bracket.

8. Remove the AIR pump nuts (2).

9. Lower the vehicle.

10. Remove the AIR pump.

Installation Procedure

1. Install the AIR pump.

2. Raise and suitably support the vehicle. Notice: Refer to Fastener Notice in Service Precautions. Download File PDF


Close Menu