Instalation Instructions for Retrofitting a Cruise Control Regulator in the 1996 VW Transporter T4 TDI

Instalation Instructions for Retrofitting a Cruise Control Regulator in the Transporter T4 TDI from Model Year 1996 On >

Proceed as follows:

- First, disconnect the battery ground cable.

Notes;

. P|ease obtain the radio code before disconnecting the battery.

. For the following steps, it is essential that you follow the repair manual Body lnstallation Work, lnterior in Chapter 69. Turn the steering wheel- 1' until the spoke of the steering wheel is vertical.

- Insert an approx.1 75mm long screwdriver into the hole in the steering wheel retainer from the rear (insert screwdriver about 45 mm).

- Push the screwdriver upwards

-arrow-. This pushes the securing clamp - 7- backwards and releases the snap hook -3- from the airbag'4-.

- Turn the steering wheel- 1- 18 0' and unlock the second securing clamp on the opposite side. Download File PDF


Close Menu