Home Auto Repair How to Install 18-inch Aluminum Wheel on 2018 Acura ILX

How to Install 18-inch Aluminum Wheel on 2018 Acura ILX

30

Download 2018 Acura ILX 18-inch Aluminum Wheel Installation Instructions – 1. Before installing the tire pressure sensor, clean the mating surface on the sensor and the aluminum wheel. 2. Install the tire pressure sensor and the washer in the aluminum wheel. Install the valve nut and tighten it finger tight. Make sure the tire pressure sensor is resting on the wheel. 3. While holding the tire pressure sensor against the wheel, tighten the valve nut to the specified torque. Tightening torque: 8 N·m (5.9 lb·ft)

4. Install the tires according to the instructions in the Service Manual. 5. Install the wheels on the vehicle and torque the wheel nuts to 108 N·m (80 lb·ft). 6. Drive the vehicle for at least 40 seconds at a speed of 24 km/h (15 mph) or more, and all sensor IDs will be memorized automatically. USE AND CARE • Use a neutral detergent to clean the wheels. • Rinse off the neutral detergent promptly after cleaning the wheels.