Download 2018 Honda Civic (Except Si) 17-inch Aluminum Wheel Installation Instructions – Models equipped with standard 17” wheels: Discard the tire pressure information label in this kit. Do the TPMS calibration according to the instructions in the service information (TPMS Calibration). Models Not Equipped with 17″ Wheels (Do steps 1 and 2.) 1. Open the driver’s door. Using isopropyl alcohol on a shop towel, thoroughly clean the area where the tire pressure information label will attach.
Remove the adhesive backing from the tire pressure information label and attach it over the standard tire pressure information label as shown. 2. Do the TPMS calibration according to the instructions in the service information (TPMS Calibration). NOTE: • The illustrations of the aluminum wheels are shown for reference purposes only. • Install the correct size tire. • Use a tire changer to install and remove the tires as described in the operation manual furnished with the tire changer.