Download 2018 Honda Civic Door Visors Installation Instructions – Installing the Front Door Visors 1. Fully open the left front door glass. 2. Peel the glass run channel in the areas shown. 3. Install two brackets between the door sash and the glass run channel at the measurements shown. Seat the glass run channel properly around the brackets. 4. Using an alcohol swab, thoroughly clean the area where the left front door visor will attach.
5. Peel back the adhesive backings from each adhesive tape, and tape the ends to the front surface of the left front door visor with masking tape. 6. Adjust each hole on two brackets to two holes on the left front door visor. 7. Secure the left front door visor to two brackets with two clips. Make sure to push up on the brackets while installing two clips. NOTE: Be extremely careful when installing the clips, they cannot be reinstalled after installation. 8. Adjust the position of the left front door visor as shown.