Home Auto Repair How to Install a Moonroof Visor on a 2018 Honda Civic

How to Install a Moonroof Visor on a 2018 Honda Civic

52

Download 2018 Honda Civic Moonroof Visor Installation Instructions – 1. Open the moonroof. Roll up two shop towels, and insert them between the roof panel and air deflector to lower the air deflector. NOTE: Be careful not to damage the air deflector. 2. Measure and make two marks on the roof panel as shown. 3. Using an alcohol swab, clean the roof panel at each of the two marks you made, but do not wipe off the marks. 4. Remove the adhesive backing from the two protective films, and attach them to the roof panel at the two marks.

5. Locate the third indentations from the side of the moonroof opening. Using an alcohol swab, clean the roof panel where the protective films will attach. 6. Remove the adhesive backing from the two protective films, and attach them to the roof panel at third indentation. 7. Place the left and right brackets “B” into position over the two protective films and around the lip of the roof panel, and tape them into position. NOTE: Be careful not to crease the protective film.