Download 2018 Honda Civic Rear HFP Emblem Installation Instructions – Installing the HFP Emblem 1. Apply masking tape to the tailgate as shown. 2. Using isopropyl alcohol on a shop towel, thoroughly clean the tailgate where the HFP emblem will attach. 3. Peel back the adhesive backing, and tape it to the front surface of the HFP emblem as shown. 4. Attach the HFP emblem to the tailgate. 5. Gently hold the HFP emblem against the tailgate and remove the adhesive backing.
6. Using the palm of your hand, firmly press the HFP emblem against the tailgate for 30 seconds. 7. Remove the masking tape. NOTE: • Be careful not to damage the vehicle body paint finish. • This kit should be installed only if the ambient air temperature is 15°C (60°F) or above. • To allow the adhesive to cure, do not wash the vehicle for 24 hours. Make sure your customer is aware of this.