Download 2018 Honda Civic Rear Seat Covers Installation Instructions – Installing the Seat Covers 1. Pull the center seat belt out of the seat belt guide. 2. Open the trunk. Pull the seat-back release lever, and fold the rear seat-back forward. If the vehicle is equipped with a 60/40 split fold-down rear seat-back, continue with step 3; otherwise, go to step 10. With 60/40 Split Fold-Down Rear Seat-Back 3. Fit the left seat-back cover onto the left rear seatback through the center seat belt. 4. Pull down the armrest.
Secure the fasteners to the left rear seat-back, and insert the tab in the left rear seat-back. Fold down the left rear seat-back, and secure the fasteners to each other. 5. Fit the right seat-back cover onto the right rear seat-back. 6. Fold down the right rear seat-back, and secure the fasteners to each other. 7. Install the armrest cover to the armrest. 8. Raise the armrest. Pull out the armrest cover between the armrest and left rear seat-back, and secure the fasteners to each other as shown.