Home Auto Repair How to Install Remote Engine Start System on 2018 Honda Civic

How to Install Remote Engine Start System on 2018 Honda Civic

39

Download 2018 Honda Civic Remote Engine Start System Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Attach the ID label. • Using isopropyl alcohol on a shop towel, clean the transmitter where the ID label will attach. • Attach the ID label to the transmitter as shown. 3. Release the passenger’s sunvisor from the passenger’s sunvisor holder. 4. Remove the passenger’s sunvisor holder by rotating it 90° counterclockwise. 5. Remove the driver’s sunvisor and unplug the vehicle connector:

• Pivot the driver’s sunvisor downward. • Wrap tape around the tip of flat-tip screwdriver. • Locate the slot in the base cover, and insert the flat-tip screwdriver into the slot. Push in and hold the retaining tab. • While holding the retaining tab, push up on the sunvisor and rotate it toward the door. NOTE: If the retaining tab does not stay pushed in, return the sunvisor to its original position and repeat this step. 6. Remove the driver’s sunvisor holder by rotating it 90° counterclockwise.