Home Auto Repair How to Install Side HFP Emblems on 2018 Honda Civic

How to Install Side HFP Emblems on 2018 Honda Civic

21

Download 2018 Honda Civic Side HFP Emblems Installation Instructions – Installing the HFP Emblems 1. Apply masking tape to the left side sill trim as shown. 2. Using isopropyl alcohol on a shop towel, thoroughly clean the left side sill trim where the HFP emblem will attach. 3. Peel back the adhesive backing, and tape it to the front surface of the HFP emblem as shown. 4. Attach the HFP emblem to the left side sill trim. 5. Gently hold the HFP emblem against the left side sill trim and remove the adhesive backing.

6. Using the palm of your hand, firmly press the HFP emblem against the left side sill trim for 30 seconds. 7. Remove the masking tape. 8. Repeat steps 1 through 7 to install the HFP emblem on the right side of the vehicle. NOTE: • Be careful not to damage the vehicle body paint finish. • This kit should be installed only if the ambient air temperature is 15°C (60°F) or above. • To allow the adhesive to cure, do not wash the vehicle for 24 hours. Make sure your customer is aware of this.