Download 2018 Honda Civic Wireless Charger Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the driver’s dashboard lower cover, then unplug the vehicle connectors and aspirator hose. 3. Remove the left console armrest. 4. Apply tape to the area shown. 5. Remove the left center console trim. 6. Remove the right console armrest. 7. Apply tape to the area shown. 8. Remove the right center console trim. 9. Remove the A/C control unit and unplug the vehicle connectors. 10. Remove the console rear panel and unplug the vehicle connectors (if equipped).
11. Remove the center console trim: A/T Models • Open the center console armrest and slide the beverage holder and the sliding tray (if equipped) rearward. • Remove the shift lock release cover with a plastic trim tool. • Insert the key into the shift lock release slot and move the shift lever knob to the D position. NOTE: Make sure to apply the parking brake. • Remove the trim panel and unplug the vehicle connectors. • Remove the console cover. M/T Models • Lower the shift lever boot to release the two retaining tabs from the boot. • Remove the shift lever knob.