Home Auto Repair How to Install the Cargo Liners on a 2018 Honda CR-V

How to Install the Cargo Liners on a 2018 Honda CR-V

34

Download 2018 Honda CR-V Cargo Liners Installation Instructions – With accessory power socket If the vehicle is equipped with accessory power socket on the left rear trim panel, cut out the piece that covers it: • Face the inside of the left cargo liner toward you. • Carefully cut out the accessory power socket section with a utility knife at the top seam and remove the overcast stitching. Installing the Cargo Liners 1. If equipped, remove the tonneau cover. 2. Fold down the left and right rear seat-backs.

3. Using the printed lines as guides, fold the two tabs on template A as shown. 4. Line up template A with the right rear side trim panel as shown. Tape template A to the right rear side trim panel with masking tape. If the vehicle is equipped with a subwoofer, continue with step 5; otherwise, go to step 6. With subwoofer 5. Using a pushpin, pierce the right rear side trim panel through template A as shown. Remove template A. Go to step 7. NOTE: There are several marks on template A. Before piercing the right rear side trim panel, verify you have the correct locations.