Home Auto Repair How to Install the Door Visors on a 2018 Honda CR-V

How to Install the Door Visors on a 2018 Honda CR-V

41

Download 2018 Honda CR-V Door Visors Installation Instructions – Installing the Front Door Visor 1. Fully lower the left front door glass. 2. Peel the glass run channel as shown. 3.Install two brackets A between the door sash and the glass run channel as shown. Seat the glass run channel properly around the brackets.NOTE: Confirm the two brackets A are installed on the door sash as shown. Check that the glass run channel is seated properly. 4. Peel the glass run channel as shown. 5. Install bracket B between the door sash and the glass run channel as shown.

Seat the glass run channel properly around the bracket. NOTE: Confirm bracket B is installed on the door sash as shown. Check that the glass run channel is seated properly. 6. Use one alcohol swab to thoroughly clean the area where the left front door visor will attach. 7. Peel back the adhesive backings partway and temporarily attach them to the front surface of the left front door visor with masking tape. 8. Adjust the two brackets A and bracket B so the holes line up with the three holes on the left front door visor.