Home Auto Repair How to Install Front Fender Trims on 2018 Honda CR-V

How to Install Front Fender Trims on 2018 Honda CR-V

91

Download 2018 Honda CR-V Front Fender Trims Installation Instructions – 1. Using an alcohol swab, thoroughly clean the left front fender where the left front fender trim will attach. 2. Fold the tab on the template. Line up the template with the character line, and attach it to the left front fender with masking tape as shown. 3. Peel back the adhesive backings, and tape them to the front surface of the left front fender trim with masking tape. Remove the remaining adhesive backings.

4. Line up the left front fender trim with the template, and attach it to the left front fender as shown. 5. While applying light pressure against the left front fender trim, carefully remove the taped adhesive backings. 6. Using a rubber roller, apply firm pressure against the left front fender trim and roll from one end to the other. Apply firm pressure, especially at the ends. 7. Remove the template. Turn the template over, and repeat steps 1 through 6 on the right side of the vehicle.