Home Auto Repair How to Install Illuminated Door Sill Trims on 2018 Honda CR-V

How to Install Illuminated Door Sill Trims on 2018 Honda CR-V

71

Download 2018 Honda CR-V Illuminated Door Sill Trims Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the passenger’s dashboard under cover and unplug the vehicle connector (if equipped). 3. Remove the passenger’s door sill trim. 4. Pull away the door opening seal, and remove the passenger’s kick panel. 5. Remove the right console cover. 6. Peel back the door opening seal, and attach a piece of masking tape to the vehicle panel as shown. 7. Remove the right rear door sill trim.

8. Remove the driver’s dashboard under cover and unplug the vehicle connector (if equipped). 9. Remove the driver’s dashboard lower cover and unplug the vehicle connectors. 10. Remove the driver’s door sill trim. 11. Pull away the door opening seal, and remove the driver’s kick panel. 12. Remove the left console cover. 13. Peel back the door opening seal, and attach a piece of masking tape to the vehicle panel as shown. 14. Remove the left rear door sill trim.