Home Auto Repair How to Install a Moonroof Visor on a 2018 Honda CR-V

How to Install a Moonroof Visor on a 2018 Honda CR-V

62

Download 2018 Honda CR-V Moonroof Visor Installation Instructions – 1. Open the moonroof. Roll up two shop towels, and insert them between the roof panel and air deflector to lower the air deflector. Be careful not to damage the air deflector. 2. Measure and make two marks on the roof panel as shown. 3. Using an alcohol swab, thoroughly clean the roof panel at each of the two marks you have made, but do not wipe off the marks. 4. Remove the adhesive backing from the two protective tapes, and attach one to the roof panel at each of two marks you made.

Wrap 10 mm (0.39 in.) of protective tape around the lip of the moonroof opening. 5. Locate the first indentations from the right front corner and left front corner of the moonroof opening. Using an alcohol swab, thoroughly clean the roof panel where the protective tapes will attach. 6. Remove the adhesive backing from the two protective tapes, and attach one to the roof panel at each first indentation. 7. Place the left and right brackets B into position over the two protective tapes and around the lip of the roof panel, and tape them into position with the strips of masking tape.