Home Auto Repair How to Install Rear Panel Lining Covers on 2018 Honda CR-V

How to Install Rear Panel Lining Covers on 2018 Honda CR-V

70

Download 2018 Honda CR-V Rear Panel Lining Covers Installation Instructions – Installing the Rear Panel Lining Covers 1. Pull away the weatherstrip. Position the right rear panel lining cover on the right side of the rear panel lining. Adjust the right rear panel lining cover toward the right side of the vehicle. Make sure that the right rear panel lining cover is installed properly. 2. Attach masking tape along the right rear panel lining cover first, then remove the right rear panel lining cover from the rear panel lining.

3. Using the alcohol swab, thoroughly clean the rear panel lining where the right rear panel lining cover will attach. 4. Remove the adhesive backings from the right rear panel lining cover. 5. Line up the right rear panel lining cover with masking tape. Carefully attach the right rear panel lining cover from the rear toward the front of the vehicle as shown. 6. Using a rubber roller, apply firm pressure against the right rear panel lining cover, and roll from one end to the other. Apply firm pressure, especially at the ends.