Home Auto Repair How to Install the Roof Racks on a 2018 Honda CR-V

How to Install the Roof Racks on a 2018 Honda CR-V

33

Download 2018 Honda CR-V Roof Racks Installation Instructions – 1. Measure from the rear end of the left roof molding. Using a felt-tip pen, mark the left roof molding as shown. 2. Using a plastic trim tool, pry up on the left roof molding cover as shown. NOTE: Be careful not to damage the retaining tab of the left roof molding cover. 3. Remove the left roof molding from the left roof molding cover. Install the left roof molding cover. 4. Pull the left roof molding toward the outside of the vehicle to release the locking tabs, and then press the locking tabs toward the inside of the vehicle, and release the left roof molding from the vehicle.

When releasing the left roof molding, start from the rear of the vehicle, and work toward the front. 5. Place a blanket over the roof under the left roof molding. Be careful not to deform the left roof molding when measuring and cutting. 6. Place an empty cardboard box under the left roof molding near the mark. 7. While wearing eye protection, use an air saw to cut the left roof molding at the mark. Do not use a cutting wheel or shears to cut the left roof molding; that can damage the left roof molding.