Home Auto Repair How to Install the Roof Rails on a 2018 Honda CR-V

How to Install the Roof Rails on a 2018 Honda CR-V

48

Download 2018 Honda CR-V Roof Rails Installation Instructions – Installing the Roof Rails 1. Measure rearward from the windshield molding, and mark the left roof molding as shown. 2. Using a plastic trim tool, pry up on the left roof molding cover to release one retaining tab. 3. Pull the left roof molding toward the outside of the vehicle to release the locking tabs, and then press the locking tabs toward the inside of the vehicle, and release the left roof molding from the vehicle.

When releasing the left roof molding, start from the rear of the vehicle and work toward the front. 4. While pulling up the left roof molding, remove two clips. Insert a plastic trim tool alternately to each slot in the clip, and release the locking tabs in the order shown. When releasing the left roof molding, start from the rear of vehicle and work toward the front. Be careful not to deform the roof molding. 5. Place a blanket over the roof under the left roof molding. Be careful not to deform the roof molding when measuring and cutting.