Home Auto Repair How to Install the Splash Guards on a 2018 Honda CR-V

How to Install the Splash Guards on a 2018 Honda CR-V

45

Download 2018 Honda CR-V Splash Guards Installation Instructions – Installing the Front Splash Guards 1. Turn the steering wheel fully counterclockwise. 2. Using a pushpin, pierce the center of the clip on the left front inner fender. NOTE: Make sure to pierce the clip perpendicular to the fender. 3. Remove two self-tapping screws from the left front inner fender. 4. Loosely secure the left front splash guard on the left front inner fender with one 5 x 25 mm self-tapping screw and two self-tapping screws removed in step 3.

5. While holding the left front splash guard against the left front inner fender, tighten one 5 x 25 mm self-tapping screw and two self-tapping screws in the order shown. NOTE: Make sure there are no gaps between the left front splash guard and the vehicle body. If there is a gap, loosen the self-tapping screws, hold the splash guard against the body, and tighten the screws. 6. Turn the steering wheel fully clockwise, and repeat steps 2 through 5 on the right side of the vehicle.