Home Auto Repair How to Install Body Side Moldings on 2018 Honda HR-V

How to Install Body Side Moldings on 2018 Honda HR-V

30

Download 2018 Honda HR-V Body Side Moldings Installation Instructions – 1. Align the front template with the edges of the left front door, and attach it to the left front door with masking tape. 2. Align the rear template with the edges of the left rear door, and attach it to the left rear door with masking tape. 3. Using two alcohol swabs, clean the door surfaces above the templates where the body side moldings will attach. Allow the alcohol to dry before installing the body side moldings. Installing the Front Body Side Moldings

4. Peel back the end of adhesive backings on the left front body side molding, and tape the ends to the front surface of the left front body side molding. Remove the other adhesive backings. 5. Align the left front body side molding with the front template, and install the left front body side molding on the left front door. 6. Hold the left front body side molding on place while removing about 50 to 100 mm (1.97 to 3.94 in.) of the adhesive backings at a time.