Download 2018 Honda HR-V Door Edge Guards Installation Instructions – 1. Clean and wax the areas to be covered with a high quality paste wax. 2. Identify each door edge guard by holding it up to the door and matching its contour with the door edge. 3. Gently place the left front door edge guard on the left front door. Align the left front door edge guard with the contour of the door. Mark the sealant at the top and bottom edges of the left front door edge guard. 4. Remove the left front door edge guard.
5. Position the cutting edge of the seam sealant cutting tool against the door edge and trim the seam sealant from mark to mark. The cutting tool cuts in only one direction. 6. Apply touch-up paint to the cut seam sealant area, and let it dry thoroughly. 7. Position the left front door edge guard on the left front door edge and align it with the marks made in step 3. 8. Starting at the feature line, use a rubber mallet to tap the left front door edge guard into position with a series of light taps, then work up and down.