Home Auto Repair How to Install the Door Visors on a 2018 Honda HR-V

How to Install the Door Visors on a 2018 Honda HR-V

159

Download 2018 Honda HR-V Door Visors Installation Instructions – Installing the Front Door Visors 1. Fully open the left front door glass. 2. Peel back the glass run channel in the areas shown. 3. Install the brackets A and B between the door sash and the glass run channel at the measurements shown. Seat the glass run channel properly around the brackets. 4. Using isopropyl alcohol on a shop towel, thoroughly clean the area where the left front door visor will attach.

5. Peel back the adhesive backings from each adhesive tape, and tape the ends to the front surface of the left front door visor with masking tape. 6. Align the clip holes in the left front door visor with the bracket holes, and install the clip while pushing up on each bracket. There should be no gap between the bracket and the door sash. NOTE: Be extremely careful when installing the clips, they cannot be reinstalled after installation. 7. Align the left front door visor to the position shown.