Home Auto Repair How to Install the Front Grille on a 2018 Honda HR-V

How to Install the Front Grille on a 2018 Honda HR-V

112

Download 2018 Honda HR-V Front Grille Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the front bumper: • Wrap a shop towel around the lever. • Attach tape to the areas shown on each side. • Remove the grille cover. • Remove the 12 clips. • Remove four clips and two self-tapping screws on each side. • Remove the front wheel arch protector on each side. • Remove the self-tapping screw on each side. • Release four retaining tabs on each side.

• With the help of an assistant, remove the front bumper and unplug the vehicle connectors, if equipped. Place the front bumper on the blanket to prevent damage. 3. Remove the front grille from the front bumper. 4. Remove the license plate (if installed). 5. Install the license plate to the license frame (if required). 6. Attach the license frame to the front grille (if required). 7. Install the front grille on the front bumper. 8. Check that all wire harnesses are routed properly and all connectors are plugged in.9. Install all removed parts. 10. Connect the negative cable to the battery.