Home Auto Repair How to Install the Moonroof Visior on a 2018 Honda HR-V

How to Install the Moonroof Visior on a 2018 Honda HR-V

83

Download 2018 Honda HR-V Moonroof Visior Installation Instructions – 1. Clean and wax the area to be covered with a high quality paste wax. 2. Open the moonroof. Roll up two shop towels, and insert them between the roof panel and air deflector to lower the air deflector. Be careful not to damage the air deflector. 3. Measure and make two marks on the roof panel at the measurements shown. 4. Using isopropyl alcohol on a shop towel, clean the roof panel at each of the two marks you have made, but do not wipe off the marks.

5. Remove the adhesive backing from the two pieces of protective tape, and attach them to the roof panel at the two marks you made. 6. Locate the second indentations from the side of the moonroof opening. Using isopropyl alcohol on a shop towel, clean the roof panel where the protective tape will attach. 7. Remove the adhesive backing from the two pieces of protective tape, and attach them to the roof panel at second indentation. 8. Place two brackets B into position over the two protective tapes and around the lip of the roof panel, …