Home Auto Repair How to Install the Rear Lower Trim on a 2018 Honda HR-V

How to Install the Rear Lower Trim on a 2018 Honda HR-V

114

Download 2018 Honda HR-V Rear Lower Trim Installation Instructions – 1. Remove the rear bumper: • Attach tape to the areas shown on each side. • Remove four self-tapping screws on each side. • Remove the rear wheel arch protector on each side. • Remove four clips, four hex bolts, and four selftapping screws. • Release 12 retaining tabs. • With the help of an assistant, remove the rear bumper. Place the rear bumper on the blanket to prevent damage. 2. Align templates A and B on the rear bumper as shown, then attach it with masking tape.

3. Using a pushpin, pierce the rear bumper at the mark on template A as shown. 4. Remove template A. 5. Using a pushpin, pierce the rear bumper at the mark on template B as shown. 6. Remove template B. 7. Using a pushpin, pierce the rear bumper as shown. 8. While wearing eye protection, drill the three pierced marks to 10 mm: • First drill with a 3 mm drill bit, with a 6 mm drill bit, then with an 8 mm drill bit, and finish with a 10 mm drill bit. • Remove all burrs. 9. While wearing eye protection, drill 10 pierced marks to 6 mm: …