Download How to Troubleshoot Remote Control Engine Start on 2018 Honda HR-V – Self-diagnostic Function Checking the Engine (Doesn’t) Run History If the engine has failed to start, the engine (doesn’t) run history of the engine can be displayed by the transmitter. By taking the following steps, the last 8 events in the engine (doesn’t) run history are displayed in sequence starting with the latest event. * For details of the displays, refer to the symptom-to-cause chart (see page 8) 1. While keeping the transmitter ENGINE button pressed, hold down the LOCK button, and after five seconds check that ERROR HISTORY is displayed.
2. CHECKING is displayed on the transmitter, and the engine (doesn’t) run history events are displayed in sequence starting from event 1. * If there are fewer than 8 engine (doesn’t) run history events, the operation is completed as soon as the saved history is displayed. If there are no engine (doesn’t) run history events, NO ERROR is displayed on the transmitter. Checking the Signal Level The control unit can measure the strength of the signals received from the transmitter and send the signal of the level signal to the transmitter.