Home Auto Repair How to Install the Splash Guards on a 2018 Honda HR-V

How to Install the Splash Guards on a 2018 Honda HR-V

196

Download 2018 Honda HR-V Splash Guards Installation Instructions – 1. Turn the steering wheel fully counterclockwise. 2. Remove the three self-tapping screws. 3. Secure the left front splash guard with three selftapping screws in the order shown below. NOTE: Make sure there is no gap between the left front splash guard and the vehicle body. If there is a gap, loosen the self-tapping screws, hold the splash guard against the body, and retighten the screws. 4. Remove the two self-tapping screws.

5. Install one spring nut on the left rear inner fender as shown. 6. Secure the left rear splash guard with two 5 x 25 mm self-tapping screws and one 5 x 18 mm self-tapping screw in the order shown below. NOTE: Make sure there is no gap between the left rear splash guard and the vehicle body. If there is a gap, loosen the self-tapping screws, hold the splash guard against the body, and retighten the screws. 7. Turn the steering wheel fully clockwise, and repeat steps 2 through 6 to install the right splash guards.