Download 2018 Honda Fit All-Season Floor Mats Installation Instruction – Installing the All-season Floor Mats 1. If equipped, remove the standard floor mats as described in the vehicle Owner’s Manual. 2. Place the grommets in the driver’s all-season floor mat over the anchors. Push the grommets into the anchors to secure the retaining tabs, then turn the knobs 90° to secure the all-season floor mat. 3. Place the passenger’s all-season floor mat as shown. 4. Place the left and right rear all-season floor mats in the areas shown.
NOTE: • Before installing the mats, identify their installation positions. • Connect the mats to the anchors to prevent the mats from sliding forward and possibly interfering with the pedals. • If you remove a mat, make sure you re-anchor it when you put it back in your vehicle. • If you replace a mat, use a factory mat designed to be used with the anchors. • If you use a non-factory mat in the driver’s footwell, make sure it fits properly and that it can be used with the anchors. • Do not put an additional mat on top of the anchored mat.