Home Auto Repair How to Install Automatic Day/Night Mirror on 2018 Honda Fit

How to Install Automatic Day/Night Mirror on 2018 Honda Fit

129

Download 2018 Honda Fit Automatic Day/Night Mirror Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the roof console: • Using a plastic trim tool, pry out and remove the left and right lenses. • Remove the roof console, and unplug the vehicle connectors. 3.Release the two hooks, then pull the mirror base cover down. Pull the hook down to release it from the mirror mount, slide the mirror base rearward, then remove the rearview mirror. 4.Release the passenger’s sunvisor from the right sunvisor holder.

5.Remove the right sunvisor holder: • Wrap masking tape around the tip of a flat-tip screwdriver. • Release the three retaining tabs on the right sunvisor holder. 6.Remove the driver’s sunvisor: • Pivot the driver’s sunvisor downward. • Wrap masking tape around the tip of a flat-tip screwdriver. • Locate the slot in the base cover, and insert the flat-tip screwdriver into the slot. Push in and hold the retaining tab. • While holding the retaining tab, push up on the sunvisor and rotate it toward the door.