Home Auto Repair How to Install Console Illumination on 2018 Honda Fit

How to Install Console Illumination on 2018 Honda Fit

79

Download 2018 Honda Fit Console Illumination Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Open the glove box, push inward on the stops, and remove the glove box. 3. Pull away the door opening seal, and remove the driver’s dashboard side lid. 4. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. 5. Apply masking tape as shown. 6. Remove the center lower cover, and unplug the vehicle connectors. 7. Remove the beverage holder.

8. Remove the parking brake trim cover. 9. Remove the center console rear trim. 10. Remove the center console, and unplug the vehicle connectors. 11. Remove the console panel. 12. Install the new console trim to the center console with the supplied screws. 13. Secure the console trim 2-pin connector to the center console with one piece of aluminum tape. 14. Using isopropyl alcohol on a shop towel, thoroughly clean where the fuse label will attach.