Home Auto Repair How to Install Illuminated Sill Trim on 2018 Honda Fit

How to Install Illuminated Sill Trim on 2018 Honda Fit

104

Download 2018 Honda Fit Illuminated Sill Trim Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the passenger’s under cover. 3. Open the glove box, push inward on the stops, and remove the glove box. 4. Pull back the door opening seal, and remove the passenger’s front door sill trim. 5. Pull back the door opening seal, and remove the passenger’s kick panel. 6. Pull back the door opening seal, and remove the driver’s front door sill trim.

7. Pull back the door opening seal, and remove the driver’s kick panel. 8. Apply tape to the areas shown. 9. Remove the center lower cover, and unplug the vehicle connectors. 10. Using isopropyl alcohol on a shop towel, thoroughly clean the area where the fuse label will attach. 11. Attach the fuse label to the door sill trim harness fuse case. Without Other Accessory Harness 8-pin Connector 12.Plug the door sill trim harness 8-pin connector into the fuse box. Go to step 15.