Home Auto Repair How to Install Ambient Light on 2018 Honda Odyssey

How to Install Ambient Light on 2018 Honda Odyssey

195

Download 2018 Honda Odyssey Ambient Light Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery. 2. Pull away the door opening seal, and remove the driver’s dashboard side lid. 3. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. 4. Remove the tape to free the vehicle 2-pin connector. 5. Install the ambient light on the instrument panel as shown. 6. Plug the vehicle 2-pin connector into the ambient light.

7. Remove the passenger’s dashboard under cover. 8. Install the ambient light on the passenger’s dashboard under cover as shown. 9. Remove the tape to free the vehicle 2-pin connector. 10. Plug the vehicle 2-pin connector into the ambient light, then install the passenger’s dashboard under cover. 11. Check that all wire harnesses are routed properly and all connectors are plugged in. 12. Install all removed parts except for the front bulkhead cover and the intake air tube. 13. Connect the negative cable to the battery. 14. Install the front bulkhead cover and the intake air tube.