Download 2018 Honda Odyssey Automatic Day/Night Mirror Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery. 2. Remove the roof console: • Using a small flat-tip screwdriver wrapped with a shop towel, pry out and remove the left and right lenses. • Open the sunglass holder and remove the four screws. • Remove the roof console and unplug the vehicle connectors. 3. Using a plastic trim tool, remove the camera cover lid.
4. Remove the camera cover. 5. Loosen the TORX screw, and remove the rearview mirror. 6. Install the automatic day/night mirror on the mirror mount as shown, and tighten the TORX screw. 7. Remove the tape to free the vehicle 7-pin connector. 8. Attach masking tape to the vehicle harness at the measurement shown. 9. Route the vehicle harness as shown. Be careful not to crease the headliner. Secure the vehicle harness to the holder on the camera cover base, and plug the vehicle 7-pin connector into the automatic day/night mirror.