Home Auto Repair How to Install Door Edge Film on 2018 Honda Odyssey

How to Install Door Edge Film on 2018 Honda Odyssey

174

Download 2018 Honda Odyssey Door Edge Film Installation Instructions – 1. Identify each door edge film by referring to the identification marks. 2. Open the left front door. Using an alcohol swab, thoroughly clean the area where the left door edge film will attach. 3. Close the left front door. 4. Using a spray bottle with the 3M protective tape application solution, spray the outside of the left front door where the left door edge film will attach. NOTE: Do not spray the inner surface. If the vehicle is equipped with side protectors, go to step 7; otherwise, continue with step 5.

5. Open the left front door again. Peel back about 50 mm (2.0 in.) of adhesive backing from the left door edge film. Line up the V-notch in the left door edge film with the character line of the left front door. 6. Line up the mark on the left door edge film with the end of the left front door. While applying light pressure, carefully remove the adhesive backing. Then, go to step 12. With Side Protectors 7. Using scissors, cut the left door edge film as shown. 8. Open the left front door again. Peel back about 50 mm (2.0 in.) of adhesive backing from the upper part of the left door edge film.