Home Auto Repair How to Install the Door Visors on a 2018 Honda Odyssey

How to Install the Door Visors on a 2018 Honda Odyssey

196

Download 2018 Honda Odyssey Door Visors Installation Instructions – Installing the Front Door Visors 1. Check the shapes of the brackets A and B before installation. 2. Fully open the left front door glass. 3. Peel the glass run channel. 4. Install two brackets A to the door sash as shown. 5. Install the glass run channel and secure two brackets A. Check that the two brackets A are installed on the door sash as shown. Check that the glass run channel is installed properly.

6. Using an alcohol swab, thoroughly clean the left front door where the left front door visor will attach. 7. Apply pieces of masking tape to the end of the adhesive backings as shown. Peel back the adhesive backings partway and temporarily attach them to the front surface of the left front door visor. 8. Adjust the two brackets A so the holes line up with the two holes on the left front door visor. 9. Secure the left front door visor to two brackets A with two clips. Make sure to push up on the two brackets A while installing the two clips.