Home Auto Repair How to Install Engine Block Heater on 2018 Honda Odyssey

How to Install Engine Block Heater on 2018 Honda Odyssey

180

Download 2018 Honda Odyssey Engine Block Heater Installation Instructions – 1. Allow the engine and all cooling system components to cool down. 2. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery. 3. Remove the front bumper: • Remove the intake air guide. • Apply masking tape to the areas shown on each side.

• Remove the four self-tapping screws, four clips, two clips with spacer, two washer-bolts, two short bolts, and four long bolts. • With the help of an assistant, release the 10 retaining tabs on each side. • Release the two retaining tabs. • With the help of an assistant, remove the front bumper and unplug the vehicle connectors if necessary. • Place the front bumper on a blanket. 4. Release the nut clip on the negative cable, and unplug the vehicle connector. Open the positive cable cover, and disconnect the positive cable from the battery.