Home Auto Repair How to Install Illuminated Door Sill Trim on 2018 Honda Odyssey

How to Install Illuminated Door Sill Trim on 2018 Honda Odyssey

157

Download 2018 Honda Odyssey Illuminated Door Sill Trim Installation Instructions – 1. Disconnect the negative battery cable from the battery:• Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative battery cable from the battery. 2. Remove the passenger’s dashboard under cover, and unplug the vehicle connector (if equipped). 3. Open the glove box, and release the damper rod from the glove box. 4. Close the glove box, and remove the two bolts from the glove box.

5. Remove the glove box. 6. Remove the passenger’s door sill trim. 7. Pull away the door opening seal, and remove the passenger’s kick panel. Front and rear illuminated door sill trim kit, continue with step 8; otherwise, go to step 11. Front and rear illuminated door sill trim kit 8. Remove the right rear door sill trim. 9. Pull up the right front seat belt lower anchor bolt cover, and remove the right front seat belt lower anchor bolt. 10. Pull away the door opening seals, and remove the right B-pillar lower trim, and unplug the vehicle connector (if equipped).