Home Auto Repair How to Install a Moonroof Visor on a 2018 Honda Odyssey

How to Install a Moonroof Visor on a 2018 Honda Odyssey

165

Download 2018 Honda Odyssey Moonroof Visor Installation Instructions – 1. Clean the areas to be covered. 2. Open the moonroof. Roll up two shop towels and insert them between the roof panel and air deflector to lower the air deflector. Be careful not to damage the air deflector. 3. Measure and make two marks on the roof panel as shown. 4. Using an alcohol swab, thoroughly clean the roof panel at each of the two marks you have made but do not wipe off the mark. 5. Remove the adhesive backing from the two protective films and attach one to the roof panel at each of the two marks you made.

Wrap 10 mm (0.39 in.) of protective film around the lip of the moonroof opening. 6. Locate the third indentations from the right front corner and left front corner of the moonroof opening. Using an alcohol swab, thoroughly clean the roof panel where the protective films will attach. 7. Remove the adhesive backing from the two protective films and attach one to the roof panel at each third indentation. 8. Place the left and right brackets B into position over the two protective films and around the lip of the roof panel, and tape them into position with strips of masking tape. NOTE: Be careful not to crease the protective film.