Download 2018 Honda Odyssey Wireless Charger Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery. 2. Using a trim tool, pry up on the rear of the center console to release the clips and retaining tabs. Remove the center console trim. 3. If equipped, open the shutter. 4. Remove the tray and unplug the vehicle connector. 5. Install the wireless charger unit on the wireless charger panel with four self-tapping screws.
6. Plug the vehicle connector into the wireless charger unit, and secure the wireless charger unit to the center console as shown. 7. Remove the eight clips from the center console trim shown, and install the eight new clips supplied in this kit as shown. 8. Install the center console trim. 9. Check that all wire harnesses are routed properly and all connectors are plugged in. 10. Install all removed parts except for the front bulkhead cover and the intake air tube. 11. Connect the negative cable to the battery.