Download 2018-2019 Honda Odyssey Backup Sensors User’s Information Manual – Operation Before using the backup sensors, become familiar with the types of sounds in relation to the distances between the sensors and the object by actually backing your vehicle into a parking space. Also, confirm the detecting range of each backup sensor. 1. Apply the parking brake. 2. Press the ENGINE START/STOP button twice to set the power mode to ON, but do not start the engine yet. 3. Turn the backup sensor switch to ON. 4. With your foot on the brake, push the Reverse button.
Make sure the sensors sound for about 1 second when you push the Reverse button. This initial sound means that the system is working properly. 5. With you foot on the brake and the help of an assistant, check that the system beeps properly by slowly bringing a board close to each sensor. The beeping will change according to the sensor and the location of the board. Refer to the system beep chart on page 7 for specifications. 6. Press the ENGINE START/STOP button to set the power mode to OFF.