Home Auto Repair How to Install a CD Player on a 2018 Honda Pilot

How to Install a CD Player on a 2018 Honda Pilot

197

Download 2018 Honda Pilot CD Player Installation Instructions – 1. Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery, then wait at least 3 minutes before starting work. 2. Pull away the door opening seal, and remove the passenger’s dashboard side lid. 3. Open the glove box. 4. Remove the passenger’s lower panel. 5. Pull away the door opening seal, and remove the driver’s dashboard side lid. 6. Remove the driver’s dashboard lower cover and release the vehicle sensor.

7. Remove the center upper panel and unplug the vehicle connector. 8. Remove the center lower panel and unplug the vehicle connectors. 9. Remove the center tray. 10. Remove the lower panel and unplug the vehicle connectors. 11. Remove the seat heater switches or lids from the lower panel. 12. Remove the accessory socket from the accessory socket and USB socket holder or accessory socket holder. 13. Remove the accessory socket and USB socket holder or accessory socket holder from the lower panel. If vehicle is equipped with the accessory socket holder, discard it.