Download 2018 Honda Pilot Door Mirror Covers Installation Instructions – 1. Wrap a shop towel around the hood latch • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery, then wait at least 3 minutes before starting work. 2. Insert the shop towel between the mirror holder and the door mirror visor to protect the vehicle as shown. 3. Remove the mirror holder, and unplug the vehicle connectors. 4. Remove the door mirror visor.
5. Using needle nose pliers wrapped with tape, remove the door mirror housing, and unplug the vehicle connectors. 6. Remove the TORX screw from the turn signal light. 7. Using the needle nose pliers, remove the door mirror upper housing. 8. Install the right door mirror cover on the door mirror lower housing. 9. Secure the right door mirror cover with the TORX screw removed in step 6. 10. Plug in the vehicle connectors. 11. Install the door mirror housing on the door mirror bracket. 12. Install the door mirror visor with the TORX screws removed in step 4 and one hook.